7 Feb
2005
7 Feb
'05
5:09 p.m.
On Mon, 2005-02-07 at 14:56, anahata wrote:
I'll have a looksee. Thanks.
--
Phil
Our 2nd CD: http://www.cdbaby.com/naomisfancy
Naomi's Fancy performances: http://naomisfancy.virtualave.net/schedule.html
On Mon, Feb 07, 2005 at 11:24:33AM -0500, Paul Coccoli
wrote:
IIRC, the AKG C3000B requires between 9 -48 volts phantom power.
http://www.8thstreet.com/product.asp?ProductCode=4501&Category=Micropho…
POWER REQUIREMENT 9-52V
Oops! I have a perfect memory! I can forget everything!
It will work OK. Before I got the preamp, I used a couple of 9 volt
batteries (since I couldn't find appropriate current limiter resistors
in my junk box.
I'd recommend the M-Audio Audio Buddy
Good value at the low end, as long as your mics don't need a full spec
48V phantom power - you get about 36V which is fine for some mics but
not others. I've
looked at 4+ channel mic preamps, and they seem to be either
really cheap (Nady, SM-Pro) or way too expensive. The other option,
as other have mentioned, is a compact mixer (Yamaha, Mackie
The Mackie VLZ1202 is a very good option for that - widely
acknowledged as killer value for money if you need 4 channels of mic
preamp, especially if you need low noise.