Re: [LAU] Noob needs help using jack

On Sat, June 15, 2013 9:32 am, Mario R. Osorio wrote: Be aware that the google voice (assuming the same technology as the gmail phone app) has higher latency than some of the others (including skype). I think a mix of idjc, jackdbus and pulse (with the jack-pulse bridge module installed) should work. Please note that because of the multiple codecs running at the same time, you need a modern machine. I have managed to get this to work using my ten year old P4, but it was just barely and I had to play with the latency of jack to balance performance with working at all. idjc has it's own audio file player built in and I would use that instead of vlc or audacious as they do (at least audacious does) strange things when set to jack as an output :) I am not sure which version of ubuntustudio you have. There have been issues with the pa-jack bridging in the past and there are some features available now which were not a few versions ago. One of the important ones is that pa used to bridge as many lines as the audio interface would handle... 10 ins and outs in my case which used much more CPU than just the two lines I needed :) basic workflow: browser with google voice, talks to pulse. Pulse is bridged to jack, two lines each way, and set to not auto connect (auto connect is to audio playback/capture) idjc has a port called phone in out (connect to pulse) as well as local mics from the sound card. They would all be connected using the connections pannel in qjackctl for example. Once you have it figured out save it as a session. Set idjc not to stream, but to record. The order of running things is important: -pulse runs at login. -start jackdbus with qjackctl and confirm that the pulse ports show up. (in qjackctl connections) -in pavucontrol, set the default output to jacksink and the default capture (input) to jack source. (green check box) -start idjc. -Connect the pulse ports to the idjc phone ports. -Connect mics as needed (idjc allows you set up however many mic or stereo inputs as you need) (this would be the place to create a session. in qjackctl the patchbay would be the place for this) -make your google voice connection and verify all the sound goes both ways. (If the person on the other end of the line can't hear the audio playback from the file player you may have to connect the line back to pulse to the program output instead of the phone port.) -Set up record and go. All audio playback should be headphones :) I would have two computers in the same room and try it all out. The second computer would be the remote and so should be able to have any OS on it that can handle google voice. Any youtube audio would get mixed in with the audio coming from your remote google voice conversation. Pavucontrol will allow you to control the levels of the two signals for balance. Using just pulse is possible, but less controllable. For that, you just need to get familiar with pavucontrol. It's use for these kinds of things is not obvious :) The thing to remember is that with PA a connection only exists when it is being used. That is Audacity will only have an input to connect to when the record button is active... so pause ->record->make connections->set levels->release pause to record. Applications made for jack (not audacity which has jack as an addon) open a jackport at application start and it stays open as long as the application is running. Just like in the analogue world where a tape machine always has an input plug and the cable that connects to it doesn't move just because you hit the stop button. -- Len Ovens www.OvenWerks.net