15 Aug
2017
15 Aug
'17
10:35 p.m.
2017-08-15 22:15 GMT+02:00 Fons Adriaensen <fons(a)linuxaudio.org>rg>:
On Tue, Aug 15, 2017 at 02:56:32PM +0200, Jaromír
Mikeš wrote:
Well ... that's what I usually do :)
But is not always enough ... with big system in outdoor there is a problem
to measure with laser on sunny days.
Yes there are expensive solutions like for e.g. from Leica which works up
to 200m on sun ... price about 500$
Also there is one other problem ... when you align top speakers (flying)
with subs (stacked) I believe 15'' from "tops" having faster reaction
than
18'' from subs.
And one more problem ... system I am working with having some delays on
factory presets ... Yep they are documented in charts ...
But anyway would be nice to have a tool to verify own calculation.
best regards
mira
I am searching for tool that would allowed me to
align sound system.
I would like send sound impulse to one speaker and get delay time (ms)
based on captured signal by measurement mic.
Practical solution:
For a small (living room) system, just use a tape measure.
For a big one (PA system), use a laser rangefinder.
Then divide by speed of sound (343 m/s) in normal conditions.