7 Jun
2011
7 Jun
'11
8:47 a.m.
On 06/07/2011 04:20 AM, Ralf Mardorf wrote:
I can run
$ jackd --sync -Xalsarawmidi -dalsa -r48000 -p1024
without getting an error message, it's the same for
$ jackd --sync -dalsa -r48000 -p1024
but if I run qjackctl I get
03:11:54.885 Patchbay deactivated.
03:11:54.887 Statistics reset.
03:11:54.913 Could not open ALSA sequencer as a client. ALSA
MIDI patchbay will be not available.
ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq
failed: Permission denied
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
lsmod | grep snd
you will need to load the alsa sequencer module.
The "Xilinx RME Hammerfall DSP MADI" is the
RME HDSPe AIO, shouldn't the
name be correct for the new driver/firmware?
the MADI, AIO and raydat cards are very similar hardware and use the
same driver, looks like there's some mixup in there. you can ignore it,
but yes, it should be fixed.
When running Jack, instead of showing the name DSP
MADI and two MIDI
devices for the DSP MADI, there's no name and only one MIDI device for
the first card, hence the driver/firmware was switched?
unlikely. the real hdspm MADI has three midi devices.