3 Aug
2014
3 Aug
'14
11:55 a.m.
On Sat, Aug 02, 2014 at 11:40:48PM -0700, Len Ovens wrote:
So, after you have jack running try running:
zita-a2j -d hw:0,1 -r 48000 -p 256 -n2 -c 2
This assumes your USBDualTubePre is set to 48000...
and you have set
Jack that way too :) Change the 48000 to 44100 otherwise. This would
show up in qjackctl as zita-a2j capture_1 and 2 (does here)
Just use
zita-a2j -j spdif -d hw:0,1 -r 48000 -p 256 -n2 -c 2
to get correct port names.
if you don't have zita-a2j (you should download
it) you can test
with alsa_in instead.
Wouldn't recommend that, and zita-a2j is included as an internal
client with recent Jack1 releases anyway. It can even be started
in one command together with Jack.
The -p value (with zita-a2j) can be one step less than
you have jack
set (I may get corrected :) and -n should be the same.
There are no such restrictions.
Ciao,
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)