2 Oct
2009
2 Oct
'09
11:07 a.m.
Bengt Gördén wrote:
For Daves ogg-files I suggest a very simple (takes about 30 sec) EQ setting.
(I used jamin)
0 - 120Hz cut off the low base.
900Hz - 2000Hz with centre freq cut about 30dB
4500Hz - 20kHz enhance about 10dB
Experiment with the settings and find your own settings. But I find these
settings less muffled and more crisp. YMMV.
Hi Bengt,
I finally got around to testing your settings, thank you for sending
them. Some notes on how I heard the changes:
0 - 120Hz cut off the low bass - I didn't cut much. As someone else
pointed out, the loss of the bass affects other characteristics of the
sound.
900Hz - 2000Hz with centre freq cut about 30dB - Ja, the standard cut.
Sounds good when I cut lightly, not so good with too deep a cut.
4500Hz - 20kHz enhance about 10dB - Big differences with these settings
in this range. Much better cymbal sounds, much brighter sound overall.
Btw, I tested these settings with the WAV and OGG versions. The OGG file
got the greater assist, but IMO both were improved by a little EQ trickery.
Best,
dp