12 Feb
2012
12 Feb
'12
10:41 p.m.
Hi,
Is that your setup or is
there a mic preamp involved?
If not you will HAVE to use one to get the signal that comes out of the
microphone to a proper working level.
Also I'm wondering that you get any signal at all through a passive DI box
having no phantom power...
My mic preference on a budget would be the "Bluebird" by Blue,
which has a very pleasant harmonic distortion in the lowmids, and is pretty
cheap too.
Not so on a budget an EV re20 or AKG 414 or a combination, relying also on
room size and acoustics.
Hope that helps anyway..
Moshe
but also...
what about your mixer?
a trabant shipped with ferrari engine would not do the job as you
expect :-)
Interesting. My answer is: none. The microphone cable would go to a
passive direct box (*) I got some time ago and the output of the box
then goes into the M-Audio 1010LT card and fed to Ardour. I do not see
at the moment why there would be an external mixer in there.
Small condenser mic-->Radial DI-->Maudio 1010LT (*) http://www.radialeng.com/re-jdi.htm
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user