17 Feb
2014
17 Feb
'14
10:34 a.m.
Harry van Haaren wrote
...
I'll suggest two options:
A) Get a Arduino Uno (so you have the flashable USB chip), and make it
appear as a class compliant USB MIDI device. ALSA will pick it up, and
automatically list it as a MIDI I/O device. Done.
B) Use a hardware MIDI output from the Arduino: setting the serial
baudrate
to 31250 (midi baud rate), and writing the bytes you want using
Serial.write() does the job. The hardware MIDI output is very simple:
http://arduino.cc/en/uploads/Tutorial/MIDI_bb.png
...
Hi, there's a third option, use the VUSB software USB emulation with a
simple AVR chip. I used this SW to build a simple MIDI I/O device that works
fine with Linux:
http://forums.obdev.at/viewtopic.php?f=8&t=1352
There are already some projects using my MIDI code:
http://www.obdev.at/products/vusb/prjall.html
Ciao, Martin
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Audio-and-Bluetooth-tp89477p89480.html
Sent from the linux-audio-user mailing list archive at Nabble.com.
