22 Dec
2003
22 Dec
'03
11:02 a.m.
WR,
Hi. The info below seems inconsistent. It appears that you have a
Hammerfall card (either 9652 or 9636) and not the HDSP 9632. from the lspci
results. Is this the case?
If so, you should be loading the driver for the Hammerfall (snd-rme9652)
and not the driver for the HDSP family. (snd-hdsp)
Mark
-----Original Message-----
From: linux-audio-user-bounces(a)music.columbia.edu
[mailto:linux-audio-user-bounces@music.columbia.edu]On Behalf Of WR
Sent: Sunday, December 21, 2003 2:38 AM
To: linux-audio-user(a)music.columbia.edu
Subject: [linux-audio-user] rme9632 status?
Spent the last few hours reading threads about hdsp firmware and issues,
and I'm wondering where things are currently at (development seems to
happen pretty rapidly around here!)...just installed a 9632 rev3, with
alsa-driver 1.0.0-rc2, and have some way to go, I reckon...
lspci shows:
00:09.0 Multimedia audio controller: Xilinx Corporation RME Digi9652
(Hammerfall) (rev 03)
dmesg:
RME Hammerfall-DSP: no cards found
# uname -a
Linux 2.4.22-ck2 #1 SMP Sun Dec 21 00:23:34 PST 2003 i686 AMD Athlon(tm)
MP Processor 1900+ AuthenticAMD GNU/Linux
What are the currently recommended kernel/alsa/firmware/eprom versions?
alsa-project.org appears to recommend using the hdsp driver instead of
rme9652 on the 9632 -- is there any reason to use one or the other? Or am
I reading it wrong...
Thanks for any advice!!
WR