28 Jul
2014
28 Jul
'14
11:30 a.m.
On Fri, Jul 18, 2014 at 6:22 PM, Fons Adriaensen <fons(a)linuxaudio.org> wrote:
On Fri, Jul 18, 2014 at 10:14:36AM +0000, Fons
Adriaensen wrote:
To conclude, once I got the time to do another spot of recording, the
noise is a hissy sound. After taking Lens' advise on the high-Z
(that's input 2 of the UA-25EX, as he mentioned), the volume is much
improved, enough so that I don't have to amplify the signal to get
usable output (and hence almost no audible noise). Using an XLR to XLR
cable.
Looks like a 'simple' impedance matching issue. Probably blindingly
obvious to most here (at least to Fons, Lens, and the other regulars),
but something my googling did not show up. Will file that away in
memory as something else to check in future.
Thanks all!
On Fri, Jul 18, 2014 at 09:17:39AM +0800, Oon-Ee
Ng wrote:
In a later post I see you have an XLR to TRS cable. This will not
work well as the TRS input on the UA25 is attenuated before is goes
into the preamp. You really need an XLR to XLR cable.
The maximum volume I get from my Shure SM75 seems
very low. The result
of this is when I normalize I get fairly significant background hum.
If this is really hum - a constant low frequency drone like sound -
then the first thing to check is the cable.
Or is it noise - a hissy sound with no particular frequency ?
The UA25 is not really low noise, but for speaking close to the
mic it should be perfectly OK.
Could you make a short (30 second or so) example available
somewhere ?