Re: [linux-audio-user] Using a Shure sm57 mic w/ low end soundcard

On Sun, Nov 02, 2003 at 03:21:00PM -0900, Paul Berry wrote: 1. Yes. The mic input on soundcards (especially consumer ones) is really only for voice recording using an electret mic that has quite high output. Contrary to another answer, I'd say the SM57 is low output, certainly compared with any condenser mic. 2a. MidiMan (M-Audio?) Audio Buddy is the entry level and gives excellent results. 2b. As suggested, the mic channels of a Mackie VLZ mixer gives exceptional bang for buck if you think you'll ever need more than 2 mic channels, or if you'll ever want proper (48V) phantom power, or have a use for a small workhorse mixer. The Mackies seem to have lower noise than most mixers at the low-cost end of the market. You should then be able to use the line input of your sound card, connected to the preamp output. On the Mackie mixer use the channel insert point, which is a TRS jack, tip = send. In fact a standard mono 1/4" jack will do the Right Thing as long as you don't want any mic signal on the mix bus. Bear in mind that your sound card line input is stereo, so you can either connect the preamp to both L and R inputs, or just to one input and take care to ignore the other one in case it contributes extra noise. -- Anahata anahata(a)treewind.co.uk Tel: 01638 720444 http://www.treewind.co.uk Mob: 07976 263827