29 Apr
2014
29 Apr
'14
7:47 p.m.
On Tue, 29 Apr 2014 18:27:16 +0000
Fons Adriaensen <fons(a)linuxaudio.org> wrote:
On Tue, Apr 29, 2014 at 05:57:31PM +0200, Robin Gareus
wrote:
I'd like to bring my UA25 as well, but sadly I won't be coming this
year.
Instead of key signing parties we well have interface calibration
parties. :)
I wish you all a ton of fun at the LAC.
Regards,
Philipp
On 04/29/2014 03:59 PM, Fons Adriaensen wrote:
For a UA25 you'd need a soldering iron to remove the pots
and replace them by fixed resistors :-)
The older UA5 (which I will bring) has an advantage in having
line inputs (on the back) that bypass the mic preamp. They have
a gain control, but it's just a passive pot which you can safely
turn to maximum. All this was removed on later models to make
place for MIDI connectors...
Ciao, If you attend the workshop you can bring your
laptop
and audio interface [*] and have it calibrated against
a precision RMS meter so you can later use it to
measure other things.
very nice! Will there be pliers and hotglue or similar crazy-glue
available so that one can permanently fix the dials of the
soundcard in question? I'm planning to bring a UA-25.