21 Jan
2010
21 Jan
'10
11:11 p.m.
cal wrote:
david wrote:
With hard and soft both set to 99, yoshimi 0.053 is busy making happy
noises for me!
Interesting difference between Zyn and Yoshimi here. Zyn has a Reverb
effect set, and shows it. Yoshimi shows "No effect". I don't think I
picked any effect in Zyn, I think that's just the way it came.
No prb, glad to have an updated Yoshimi running around! Cal =
Excellent! :-)
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
cal wrote:
Almost, but not quite. Somewhere in limits.conf it describes (perhaps
cryptically)
how you can set hard and soft at the same time (on the same line) using the '-'.
I don't know of any reason to have hard and soft set different, so as per the jack
faq is about as good as you can get. david wrote:
Thanks. I changed the hard one to
99. The JACK FAQ didn't say anything
about the difference between "hard" and "soft", so I set the
"soft" one
to 55. Can't test it right now, will test it later!
[ ... ]
>> @audio hard rtprio 50
>> @audio soft rtprio 30
> These are rather low. I just looked, and yoshi tries for 55, so these settings
> would fail. You could either bump those settings higher, or adjust the value
> in MusicIO.cpp line 214 down to your level and see if that helps.
I'll boost mine up to go with toshi. It was a copy/paste from someone
else's recommendation.
I still get the feeling you're inclined to set them
lower than what's
consider normal or recommended. The Jack FAQ spells it out pretty
simply - <http://www.jackaudio.org/faq>.