17 Sep
2004
17 Sep
'04
1:15 p.m.
/proc/asound/cards reports
0 [rev20 ]:VIA686A -VIA 82C686A/B rev20
VIA 82C686A/B rev20 at 0xac00, irq 11
1 [UA100 ]: USB-Audio - UA-100
Roland UA-100 at usb-00:07.2-2
So it looks like something is seen but how do I get aplay to play to the
UA-100? The VIA card has alway's reported itself but neither windows,
linux or anything else has ever got any life out of it!
so do I use the aplay to select the card even thou, aplay -l doesn't
list it?
Chris
Chris Lyon wrote:
Dear all,
Roland UA-100 plugged into PC, usbview detects interface.
aplay -l doesn't report any knowledge of the device.
I believe I have loaded the appropriate modules, snd-usb-audio but the
system resolutely refuses to make music as it has before. I would
include the appropriate modules.conf files to show but this E-mailing
machine and the linux box are not connected and I feel cross reading
would be a little error strewn.
Can anyone outline a procedure for checking at which point a problem
might occur and, if possible, a list of command line utilities that
can reveal precisely what components are loaded. Is it possible to
load modules incompletly such that a component identifies it's
presence but isn't actual functioning. If this is so how does one
check the dependancies?
I understand that amix and alsamixer won't recognise the presence of a
USB connected audio interface, is this the case?
Any help appreciated.
Chris Lyon