5 Feb
2003
5 Feb
'03
2:14 p.m.
Oyvind,
I am using the HDSP 9652 under Alsa and Jack. Depending on how you want
to solve your problems I could probably help in different ways.
As background, I'm using RH 7.3 and the PlanetCCRMA flow. At one point we
required a special patch to allow alsaconf to even find the device. I think
that patch is now in Alsa CVS, but I do not know for sure.
FYI - the internal mixer in the HDSP 9652 is currently disabled, so it
always outputs at full volume. Make sure you have control over your speaker
or headphone volume. I wouldn't want you to hurt your ears as I hurt mine.
(As an aside, there could be legal liabilities to supplying drivers that
allow people to get hurt, independent of what the package disclaimers says
about using at your own risk.)
Let me know how I can help.
Cheers,
Mark
-----Original Message-----
From: linux-audio-user-admin(a)music.columbia.edu
[mailto:linux-audio-user-admin@music.columbia.edu]On Behalf Of Oyvind
Hammer
Sent: Wednesday, February 05, 2003 9:00 AM
To: linux-audio-user(a)music.columbia.edu
Subject: [linux-audio-user] Hammerfall HDSP 9652 ?
Hello all, we have purchased a Hammerfall HDSP 9652
soundcard with 3x ADAT out (no converters).
We can not get it to work with either the ALSA driver
for Hammerfall RME 9652 or for Hammerfall HDSP
(modprobe fails, sometimes with a segfault, even if
it is run very early in the boot process).
I must say we are entirely confused about the
different names of these cards, and what driver
(if any) is supposed to work with our card.
Has any on this group managed to get the Hammerfall
HDSP 9652 with 3x ADAT out (no converters) to work
under ALSA (or OSS?). If so, any advice?
Thanks!
Oyvind Hammer &
Natasha Barrett
Oslo, Norway