4 Nov
2008
4 Nov
'08
12:21 a.m.
Sean Darby wrote:
Let's see if I understand this right...
2 mics going into 2 XLR jacks that are part of the 1010LT, which then
(PCI) goes into the rest of the computer where ALSA/OSS will recognize
it and process it.
Yes and no. If you want to have good mic quality and control you should
go through a mixing desk first.
The sound card will convert the analog signal to digital signal and the
sound drivers will allow you to get access to the digital signal
generated by the sound card and pipe it into your computer to jack or
another application that reads the information being handed off by the
sound driver.
You should get a mixer. As you are intending to work with mics and
instruments then it will make your life a lot easier. Also aim for a
higher quality brand as it really makes a difference. Even a second hand
Mackie will be better than a new Behringer in most cases so ebay is your
friend. Personally I would get a Midas if I could afford one.
Evolution make/made some reasonable usb keyboards. You should check out
the local store and see which one has the most features for your
immediate needs. You might find that a usb midi controller with a few
keys is better suited rather than a full set of keys. Things to look our
for are touch sensitivity, size of the knobs, location of the buttons
etc. There are so many devices on the market that it is best to test a
few before you buy.
--
Patrick Shirkey
Boost Hardware Ltd.
Does the 1010LT already serve as an A/D D/A
converter?
If you use the analog inputs then alsa or oss will do the conversion for
you. If you use the adat interface then the mixer will do it.
What are the pros and cons behind using ADAT these
days?
Is it now more common to use either the hard drive for recording or a
flash drive recorder than ADAT?
ADATs get pretty expensive pretty fast, if I can leave that out of the
equation (for now at least) that'll help.
In this case I was referring to the ADAT connectors which allow you to
transfer digital signals between the mixer and the sound card. You would
still record to hard disk or external disk or if you have ADAT tapes
then you can use them too.
Most studios require a mixer but many producers
do not...
I plan on making my current music studio (where I teach music lessons) into a make-shift
recording studio, though also plan on doing the producing aspects after recording (going
in and working with the recordings via the computer).
> I'm
also looking for a MIDI keyboard, perhaps 88-keys but condensed such
> that I can put it on the desk near the computer keyboard and LCD monitor
> - intention on the MIDI keyboard is for composing and recording.
>
Does anybody have any recommendations or suggestions on MIDI keyboards?