On Sun, 27 Jan 2013 01:36:46 +0100, Bob van der Poel <bob(a)mellowood.ca>
wrote:
2013/1/26 Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net>et>:
pasuspender -- jackd -dalsa -dhw:0 -r48000 -p1024
-n3
Yes, I thought the 2nd -d was necessary as well. But, if I use it I
get even more problems :)
jackd 0.121.2
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben
Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
apparent rate = 48000
creating alsa driver ... hw:0|hw:0|1024|3|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 3
periods
ALSA: final selected sample format for capture: 32bit integer
little-endian
ALSA: use 3 periods for capture
ALSA: final selected sample format for playback: 32bit integer
little-endian
ALSA: got smaller periods 2 than 3 for playback
ALSA: cannot configure playback channel
cannot load driver module alsa
ts.linuxaudio.org/listinfo/linux-audio-user
$ aplay -l
-dhw:0,foo
perhaps -dhw:0,1