[LAU] [hdspmixer solved - qjackctl unsolved] Kernel 2.6.39.1 - 2nd trial ALSA packages [on-topic only]

Oops, it didn't came through the list, perhaps because it was in HTML. -------- Forwarded Message -------- From: Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> To: Robin Gareus <robin(a)gareus.org> Cc: linux-audio-user(a)lists.linuxaudio.org Subject: [hdspmixer solved - qjackctl unsolved] Kernel 2.6.39.1 - 2nd trial ALSA packages [on-topic only] Date: Wed, 08 Jun 2011 20:03:16 +0200 On Tue, 2011-06-07 at 21:54 +0200, Robin Gareus wrote: Log (+ a real time log, when bread-and-butter are important and the following steps are done in passing, so even a little bit referring to the off-topic thread 'time', in a context were milliseconds buried in imperceptibility, this might be a useful information for those who will do the same, no sarcasm) It's not that time consuming, when there's nothing else to do, but tedious when doing it in passing and a good reason that users have to do such things from time to time, because packages maintainers doing it for free, have a life beyond Linux too. Issues are marked with ################## ### [!] ### ################## above the issue. ######################################################################## REMOVING ALL ALSA PACKAGES & KEEPING ALL DEPENDENCIES CONSISTENT ######################################################################## 'All' ALSA and libasound packages, if there e.g. is a linux-sound-base, I missed to completely remove it. $ su # synaptic Commit Log for Wed Jun 8 11:56:31 2011 Completely removed the following packages: alsa-tools lib32asound2 lib32asound2-dev libasound2-dev libasound2-doc # cd /usr/src # mkdir alsa # cd alsa # equivs-control libasound2 # gedit libasound2 Section: misc Priority: optional Standards-Version: 3.6.2 Package: libasound2 Version: 1.0.24.1 Architecture: all Description: libasound2 dummy package # equivs-build libasound2 # rm libasound2 # mv libasound2_1.0.24.1_all.deb .. # dpkg -i ../libasound2_1.0.24.1_all.deb # ls -hAl total 0 ######################################################################## ALSA-DRIVER ######################################################################## # ntpdate ntp.favey.ch 8 Jun 12:40:37 offset -0.061248 sec # apt-get source alsa-driver # ls alsa-driver-1.0.23+dfsg alsa-driver_1.0.23+dfsg-4.debian.tar.bz2 alsa-driver_1.0.23+dfsg-4.dsc alsa-driver_1.0.23+dfsg.orig.tar.bz2 # apt-get build-dep alsa-driver # mv -vi alsa-driver-1.0.23+dfsg/ alsa-driver-1.0.24 # wget ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.24.tar.bz2 # tar xvjf alsa-driver-1.0.24.tar.bz2 # cd alsa-driver-1.0.24 # gedit debian/changelog 1st line was: alsa-driver (1.0.23+dfsg-4) unstable; urgency=low edited to: alsa-driver (1.0.24) unstable; urgency=low FWIW I didn't really add a correct changelog, but replaced the first line only and will do this for the other changelogs too # gedit debian/rules unchanged # libtoolize --force --copy --automake # aclocal ################## ### [!] ### ################## # autoreconf [...] autoheader: warning: missing template: [...] autoreconf: /usr/bin/autoheader failed with exit status: 1 # debuild -b -us -uc # ls ../*.deb -hAl -rw-r--r-- 1 root root 308K Jun 8 13:55 ../alsa-base_1.0.24_all.deb -rw-r--r-- 1 root root 4.1M Jun 8 13:55 ../alsa-source_1.0.24_all.deb -rw-r--r-- 1 root root 30K Jun 8 13:55 ../linux-sound-base_1.0.24_all.deb # cd .. # dpkg -i alsa-base_1.0.24_all.deb linux-sound-base_1.0.24_all.deb I checked that the packages are installed. # mv alsa-base_1.0.24_all.deb .. # mv alsa-source_1.0.24_all.deb .. # mv linux-sound-base_1.0.24_all.deb .. # rm -r * # ls -hAl total 0 ######################################################################## ALSA-LIB ######################################################################## # date Wed Jun 8 14:29:35 CEST 2011 # apt-get source alsa-lib # apt-get build-dep alsa-lib # mv -vi alsa-lib-1.0.23/ alsa-lib-1.0.24.1 # wget ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.24.1.tar.bz2 # tar xvjf alsa-lib-1.0.24.1.tar.bz2 # cd alsa-lib-1.0.24.1 # gedit debian/changelog 1st line was: alsa-lib (1.0.23-4) unstable; urgency=low edited to: alsa-lib (1.0.24.1) unstable; urgency=low # gedit debian/rules Removed: biarch_map := i386=amd64 powerpc=ppc64 sparc=sparc64 s390=s390x \ amd64=i386 ppc64=powerpc biarch_cpu := $(strip $(patsubst $(DEB_BUILD_ARCH_CPU)=%, %, \ $(filter $(DEB_BUILD_ARCH_CPU)=%, $(biarch_map)))) # libtoolize --force --copy --automake # aclocal # autoreconf # debuild -b -us -uc # ls ../*.deb -hAl -rw-r--r-- 1 root root 896 Jun 8 15:26 ../lib32asound2_1.0.24.1_amd64.deb -rw-r--r-- 1 root root 894 Jun 8 15:26 ../lib32asound2-dev_1.0.24.1_amd64.deb -rw-r--r-- 1 root root 439K Jun 8 15:26 ../libasound2_1.0.24.1_amd64.deb -rw-r--r-- 1 root root 585K Jun 8 15:26 ../libasound2-dev_1.0.24.1_amd64.deb -rw-r--r-- 1 root root 1.5M Jun 8 15:26 ../libasound2-doc_1.0.24.1_all.deb # cd .. # dpkg -i libasound2_1.0.24.1_amd64.deb libasound2-dev_1.0.24.1_amd64.deb lib32asound2_1.0.24.1_amd64.deb lib32asound2-dev_1.0.24.1_amd64.deb I checked that the packages are installed. # mv *deb .. # rm -r * # ls -hAl total 0 ######################################################################## ALSA-UTILS ######################################################################## # date Wed Jun 8 15:39:26 CEST 2011 # apt-get source alsa-utils # apt-get build-dep alsa-utils # mv -vi alsa-utils-1.0.23/ alsa-utils-1.0.24.2 # date Wed Jun 8 17:33:47 CEST 2011 # wget ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.24.2.tar.bz2 # tar xvjf alsa-utils-1.0.24.2.tar.bz2 # cd alsa-utils-1.0.24.2 # gedit debian/changelog First line was: alsa-utils (1.0.23-5) unstable; urgency=low Edited to: alsa-utils (1.0.24.2) unstable; urgency=low # gedit debian/rules unchanged # libtoolize --force --copy --automake # aclocal ################## ### [!] ### ################## # autoreconf alsactl/Makefile.am:58: `%'-style pattern rules are a GNU make extension alsactl/Makefile.am:10: compiling `alsactl.c' with per-target flags requires `AM_PROG_CC_C_O' in `configure.in' alsaloop/Makefile.am:3: `CFLAGS' is a user variable, you should not override it; alsaloop/Makefile.am:3: use `AM_CFLAGS' instead. # debuild -b -us -uc# [...] pcmjob.c:66:33: error: ‘PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP’ undeclared here (not in a function) make[2]: *** [pcmjob.o] Error 1 make[2]: Leaving directory `/usr/src/alsa/alsa-utils-1.0.24.2/alsaloop' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-utils-1.0.24.2' make: *** [build-stamp] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2 debuild: fatal error at line 1340: dpkg-buildpackage -rfakeroot -D -us -uc -b failed # ./configure [...] config.status: WARNING: 'alsaconf/po/Makefile.in' seems to ignore the --datarootdir setting [...] # make No warnings, no errors! # checkinstall --install=no Should I create a default set of package docs? [y]: n 0 - Maintainer: [ root@debian ] 1 - Summary: [ alsa-utils ] 2 - Name: [ alsa-utils ] 3 - Version: [ 1.0.24.2 ] 4 - Release: [ 1 ] 5 - License: [ GPL ] 6 - Group: [ checkinstall ] 7 - Architecture: [ amd64 ] 8 - Source location: [ alsa-utils-1.0.24.2 ] 9 - Alternate source location: [ ] 10 - Requires: [ ] 11 - Provides: [ alsa-utils ] 12 - Conflicts: [ ] 13 - Replaces: [ ] # dpkg -i alsa-utils_1.0.24.2-1_amd64.deb I checked that the package is installed. # mv *deb ../.. # cd .. # rm -r * # ls -hAl total 0 ######################################################################## ALSA-TOOLS (hdspmixer) ######################################################################## # apt-get source alsa-tools # apt-get build-dep alsa-tools [...] The following packages will be REMOVED: gir1.0-freedesktop [...] The following NEW packages will be installed: [...] gir1.2-freedesktop [...] # mv -vi alsa-tools-1.0.23/ alsa-tools-1.0.24.1 # wget ftp://ftp.alsa-project.org/pub/tools/alsa-tools-1.0.24.1.tar.bz2 # tar xvjf alsa-tools-1.0.24.1.tar.bz2 # cd alsa-tools-1.0.24.1 # gedit debian/changelog First line was: alsa-tools (1.0.23-5) unstable; urgency=low Edited to: alsa-tools (1.0.24.1) unstable; urgency=low # gedit debian/rules unchanged # libtoolize --force --copy --automake ################## ### [!] ### ################## # aclocal aclocal: `configure.ac' or `configure.in' is required # autoreconf autoreconf: `configure.ac' or `configure.in' is required # ls ac3dec debian envy24control hdspconf hdspmixer ld10k1 mixartloader qlo10k1 sb16_csp sscape_ctl usx2yloader as10k1 echomixer gitcompile hdsploader hwmixvolume Makefile pcxhrloader rmedigicontrol seq us428control vxloader # cd hdspmixer # ./configure # checkinstall --install=no Should I create a default set of package docs? [y]: n 0 - Maintainer: [ root@debian ] 1 - Summary: [ hdspmixer from alsa-tools 1.0.24.1 ] 2 - Name: [ hdspmixer ] 3 - Version: [ 1.6.0 ] 4 - Release: [ 1 ] 5 - License: [ GPL ] 6 - Group: [ checkinstall ] 7 - Architecture: [ amd64 ] 8 - Source location: [ hdspmixer ] 9 - Alternate source location: [ ] 10 - Requires: [ ] 11 - Provides: [ hdspmixer ] 12 - Conflicts: [ ] 13 - Replaces: [ ] # dpkg -i hdspmixer_1.6.0-1_amd64.deb # mv hdspmixer_1.6.0-1_amd64.deb ../.. # cd .. # mv hdspmixer_1.6.0-1_amd64.deb .. # rm -r * # ls -hAl total 0 ######################################################################## mudita24 - ALSA GUI control tool for Envy24 (ice1712) soundcards ######################################################################## # date Wed Jun 8 19:22:18 CEST 2011 # wget http://nielsmayer.com/envy24control/mudita24-1.0.3.tar.gz # tar xvzf mudita24-1.0.3.tar.gz # cd mudita24-1.0.3 # ./configure # checkinstall --install=no Should I create a default set of package docs? [y]: n 0 - Maintainer: [ root@debian ] 1 - Summary: [ mudita24 ] 2 - Name: [ mudita24 ] 3 - Version: [ 1.0.3 ] 4 - Release: [ 1 ] 5 - License: [ GPL ] 6 - Group: [ checkinstall ] 7 - Architecture: [ amd64 ] 8 - Source location: [ mudita24-1.0.3 ] 9 - Alternate source location: [ ] 10 - Requires: [ ] 11 - Provides: [ mudita24 ] 12 - Conflicts: [ ] 13 - Replaces: [ ] # dpkg -i mudita24_1.0.3-1_amd64.deb I checked that the packages hdspmixer and mudita24 are installed. # mv mudita24_1.0.3-1_amd64.deb ../.. # cd .. # rm -r * # ls -hAl total 0 ######################################################################## ALSA-FIRMWARE ######################################################################## # apt-get source alsa-firmware-1.0.24.1 Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to find a source package for alsa-firmware-1.0.24.1 The kernel's firmware should be good enough, so no download from http://www.alsa-project.org/main/index.php/Main_Page . # cd .. # exit $ jackd --sync -Xalsarawmidi -dalsa -r48000 -p1024 jackdmp 1.9.8 [...] JackALSARawMidiDriver::Attach - input port registered (name='system:midi_capture_1', alias='system:1-1 MIDI 1 1 in'). JackALSARawMidiDriver::Attach - input port registered (name='system:midi_capture_2', alias='system:2-1 TerraTec EWX24/96 MIDI 1 in'). JackALSARawMidiDriver::Attach - input port registered (name='system:midi_capture_3', alias='system:3-1 TerraTec EWX24/96 MIDI 1 in'). JackALSARawMidiDriver::Attach - output port registered (name='system:midi_playback_1', alias='system:1-1 MIDI 1 1 out'). JackALSARawMidiDriver::Attach - output port registered (name='system:midi_playback_2', alias='system:2-1 TerraTec EWX24/96 MIDI 1 out'). JackALSARawMidiDriver::Attach - output port registered (name='system:midi_playback_3', alias='system:3-1 TerraTec EWX24/96 MIDI 1 out'). JackALSARawMidiDriver::Start - Starting 'alsarawmidi' driver. JackALSARawMidiDriver::Start - starting ALSA thread ... JackALSARawMidiDriver::Start - started ALSA thread. $ hdspmixer HDSPMixer 1.6 - Copyright (C) 2003 Thomas Charbonnel <thomas(a)undata.org> This program comes with ABSOLUTELY NO WARRANTY HDSPMixer is free software, see the file COPYING for details Looking for RME cards : Card 0 : RME AIO S/N 0x579bcc at 0xfdef0000, irq 18 RME AIO found ! Card 1 : TerraTec EWX24/96 at 0xbf00, irq 20 Card 2 : TerraTec EWX24/96 at 0xbb00, irq 21 1 RME cards card found. Initializing default presets :) $ envy24control using --- input_channels: 2 --- output_channels: 2 --- pcm_output_channels: 8 --- spdif in/out channels: 2 :) ^Cjack main caught signal 2 JackALSARawMidiDriver::Stop - stopping 'alsarawmidi' driver. JackALSARawMidiDriver::Execute - ALSA thread exiting. ################## ### [!] ### ################## $ qjackctl 19:55:04.103 Patchbay deactivated. 19:55:04.104 Statistics reset. 19:55:04.106 ALSA connection change. Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started 19:55:04.115 ALSA connection graph change. 19:55:10.728 JACK is starting... 19:55:10.729 /usr/bin/jackd -dalsa -r48000 -p1024 -n2 -D -Chw:1 -Phw:1 Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started 19:55:10.780 Could not start JACK. Sorry. First starting jackd and then launching qjackctl is ok. I didn't test if the card and anything are really ok, but it seems to be ok. Thanks again :) and Regards, Ralf -- Homepages from Oberhausen (Ruhrgebiet), culture I like to recommend http://www.cosmiclava.com/ in English http://www.achimjaroschek.com/ mixed, in English and in German