30 Dec
2018
30 Dec
'18
8:24 p.m.
On Sun, 30 Dec 2018 19:00:04 +0100, Dominique Michel wrote:
For the theremin, some provide MIDI Out and some Moog
models have CV
out connectors for the volume and the pitch. This CV out solution seam
to be the best one when used with the thereminator:
https://www.wavelicker.com/en/thereminator/
Unfortunately there seems to be no English information about the A-178
Theremin Control Voltage Source on the Doepfer website. But the German
page provides some nice pictures (and dead links). There's a note in
English: "It's not possible to connect the antenna via an additional
cable to the antenna socket. Antenna and hand form a variable capacitor
with a very small capacity in the pico Farad range. The electronics of
the module is puzzled out just for this capacity range. If a cable is
added the capacity range changes totally and the module will no longer
work ! But it's possible to mount the complete module with antenna at
the desired position, e.g. into a small case that holds one or two of
the modules. For this a longer bus cable is required."
http://www.doepfer.de/a178.htm
--
pacman -Q linux{,-rt{,-securityink,-cornflower,-pussytoes}}|cut -d\ -f2
4.20.arch1-1
4.19.10_rt8-0
4.19.8_rt6-0
4.19.5_rt4-0
4.18.16_rt9-1