24 Mar
2016
24 Mar
'16
3:06 p.m.
On Thu, 24 Mar 2016, jonetsu(a)teksavvy.com wrote:
I see. I will experiment further. The sound card DAC
levels are at
0dB. Set by the mudita24 utility for the 1010LT card. One thing you
mentioned is to lower down the volume after an export with
normalization, whereas I expected to be the same as what I have mixed.
Looking at the 1010LT manual, I see that the jumpers are only for the two
XLR connectors to set them Mic (-50ish) or line (+4). The manual then say
that the i/o level can be set in the control panel (windows/OSx) to line,
consumer or -10... that is +4, -4 or -10. I see that mudita24 does not
have these settings and so would assume 0db = +4db out... which is
definately too much for anything that likes to connect to the RCA jacks
the LT comes with. You should probably be running your DAC levels at -12
or -14 if you are using -10 amplification for monitoring.
--
Len Ovens
www.ovenwerks.net