16 Apr
2007
16 Apr
'07
1:39 p.m.
On Mon, Apr 16, 2007 at 08:49:19AM -0500, millward wrote:
I'm trying ot clean up a WAV file that has a low
sounding rumble, motor-like
sound, sort of up and down. It's lower than the bass line. I'm finding this
hard to describe in words.
Can you post a small sample somewhere?
I'm using the Gnome Wave Cleaner and its got
a notch filter but I don't know what frequency to set it for. I do know people
hear from about 20 Hz to 20,000 Hz, on a good day, so would maybe 50 Hz
to 100 Hz would be a good start?
IF you're lucky, it might be that the rumble really is completely
lower than the bassline. In that case, I'd try a very steep highpass
filter first. Set it to just below the lowest fundamental in the
bassline and see if that helps.
If the bassline is from a bass guitar, low E fundamental is about 41
Hz and low B fundamental on a 5-string is about 31 Hz. (Handy chart
here: http://en.wikipedia.org/wiki/Piano_key_frequencies).
Typically most of the energy from a bass guitar is in the first few
overtones, so you might also be able to apply some gradual rolloff of
frequencies below about 80 Hz.
--
Paul Winkler
http://www.slinkp.com