15 Aug
2015
15 Aug
'15
5:24 p.m.
On Sat, 15 Aug 2015, jonetsu(a)teksavvy.com wrote:
I would like to sync the arpeggiator from a Korg
Microstation to
Ardour. The user guide says:
"the arpeggiator will synchronize to the MIDI Clock and Start
messages received from a connected MIDI device."
The audio card is a 1010LT. The Microstation is connected through USB
and is fully seen in jack (qjackctl). Is it possible to have MIDI sync
for the external synth ? How would the wiring be done ? Will there be a
need for an Ardour MIDI track for the Start (and possibly Stop)
signals ?
Ardour already has a "MIDI clock out" You should be able to "mix" this
with the midi stream going to the korg if you are using jack midi.
Connect your normal midi out to the 1010 port going to the korg and then
connect MIDI clock out to the same 1010 port.
If you are not using a midi channel to do the actual note press input then
it is only one connection.
Note: I don't have the devices in question so I am just theorizing.
--
Len Ovens
www.ovenwerks.net