20 Oct
2006
20 Oct
'06
10:23 a.m.
On 10/20/06, Joe Hartley <jh(a)brainiac.com> wrote:
On Fri, 20 Oct 2006 12:14:35 -0200
"robert lazarski" <robertlazarski(a)gmail.com> wrote:
I seen that, but was not sure why its trying to mount on /dev/hda or
if that's really usb trying to mount there:
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
subfs 0.9
ISO 9660 Extensions: RRIP_1991A
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
ISO 9660 Extensions: RRIP_1991A
As you can see, I don't use hda :
/root> df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/sda5 36428 29754 4825 87% /
tmpfs 505 0 505 0% /dev/shm
/dev/sda2 92 13 75 15% /boot
/dev/sda1 38148 7696 30452 21% /winblows
Robert
Doing 'cat /proc/bus/usb/devices' shows
no such device, and I get
nothing in /var/log/messages .
Try looking at the tail end of the output from dmesg, that's where info
on a usb device will be written when it's plugged in.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa