[LAU] Jack does not see USB sound card Boss Micro BR-80

trying to use Boss Micro BR-80 as USB soundcard with Jack but seems like jack (qjackctl) does not recognize it. My system: Ubuntu 13.04 with pretty much standard configuration (runs pulseaudio, installed jackd2, pulseaudio-module-jack, qjackctl) Have built in audio that I don't really plan to use with jack (or at least not in initial setup where I am just trying to make something work): 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Boss Micro BR-80 seems to be recognized properly (see below) but qjackctl does not list it in Set under any of Interface, Input Device, Output Device choices, I only see /dev/dsp, /dev/audio, plughw:0 and hw:0. Any ideas why it does not work or how to troubleshoot it further? When I plug BR-80 in I get (output of usb-devices): T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0582 ProdID=0130 Rev=00.00 S: Manufacturer=Roland S: Product=BR-80(AUDIO) C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=00 Driver=snd-usb-audio I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=02 Driver=snd-usb-audio I: If#= 2 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=01 Driver=snd-usb-audio I: If#= 3 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=00 Driver=snd-usb-audio aplay seems to recognize it. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: BR80AUDIO [BR-80(AUDIO)], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server hdmi:CARD=Generic,DEV=0 HD-Audio Generic, HDMI 0 HDMI Audio Output dmix:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct sample mixing device dsnoop:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct sample snooping device hw:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct hardware device without any conversions plughw:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Hardware device with all software conversions sysdefault:CARD=SB HDA ATI SB, ALC892 Analog Default Audio Device front:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog Front speakers surround40:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=SB,DEV=0 HDA ATI SB, ALC892 Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog Direct sample mixing device dmix:CARD=SB,DEV=1 HDA ATI SB, ALC892 Digital Direct sample mixing device dsnoop:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog Direct sample snooping device dsnoop:CARD=SB,DEV=1 HDA ATI SB, ALC892 Digital Direct sample snooping device hw:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog Direct hardware device without any conversions hw:CARD=SB,DEV=1 HDA ATI SB, ALC892 Digital Direct hardware device without any conversions plughw:CARD=SB,DEV=0 HDA ATI SB, ALC892 Analog Hardware device with all software conversions plughw:CARD=SB,DEV=1 HDA ATI SB, ALC892 Digital Hardware device with all software conversions sysdefault:CARD=BR80AUDIO BR-80(AUDIO), USB Audio Default Audio Device front:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio Front speakers surround40:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio Direct sample mixing device dsnoop:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio Direct sample snooping device hw:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio Direct hardware device without any conversions plughw:CARD=BR80AUDIO,DEV=0 BR-80(AUDIO), USB Audio Hardware device with all software conversions thanks! erik