6 Feb
2005
6 Feb
'05
8:42 p.m.
Phil,
The 1010LT has 2 balanced XLR inputs and the remainder are unbalanced. I
have this one and it is great for what I need. I have a stereo preamp
hooked into the XLR inputs.
The 1010 appears to have 8 balanced in/out using TRS connectors instead
of XLR inputs. I understand that this is a very nice board. Both cards
are well supported with ALSA.
Good luck. Please post some recordings!!
-Joe D
On Sun, 2005-02-06 at 18:11, Phil Sexton wrote:
Hi listmembers,
Looking over the info here:
http://www.m-audio.com/products/en_us/
It looks as if the Delta 1010LT has 2 XLR inputs, whereas the Delta 1010
only has 1/4" jacks.
http://www.m-audio.com/images/en/callouts/big/delta_1010.jpg
I have 1" condenser mics (AKG 3000B) which require phantom power. I
assume neither card provides it.
Can owners of these cards confirm my assumptions? What recommendations
would you give for me to purchase.
We have a 5 member band, two instruments have built in pickups, the harp
has a 1/2" condenser mic (I'm not sure if it is battery powered or
requires phantom power), all of the other instruments need miking
(Uilleann, Great Highland and shuttle bagpipes, anglo concertina,
fiddle, whistles, flutes, bodhran, bones and egg rattle).
I am building a box with Gentoo Linux intended for recording and
editing.
TIA
