11 Jun
2008
11 Jun
'08
11:49 p.m.
On Wed, Jun 11, 2008 at 11:01:35PM +0200, =?ISO-8859-1?Q?Svend-Erik_Kj=E6r_Madsen_ wrote:
ons, 11 06 2008 kl. 13:57 -0700, skrev Ken Restivo:
It's been many years since I had one, so I don't remember exactly. But once I got
into the BIOS screen, it was there. Figuring out what setting did what, exactly, was a
matter of experimentation, IIRC. At the time I wasn't doing audio so I didn't
spend much time on it-- just enough to see that the settings were there.
-ken
On Wed, Jun 11, 2008 at 11:52:24AM +0200,
=?ISO-8859-1?Q?Svend-Erik_Kj=E6r_Madsen_ wrote:
Ok i have a Thinkpad, but cant figure the BIOS settings out, any clue ?
Hi
I'm into shapeing up my system to work better. I have installed a Debian
lenny and migrated 64Studio multimedia packets on to it, and use
64studio's kernel 2.6.21-1-multimedia-486, then installed irqbalance and
try to find the best setup for my RME Hammerfall Multiface card.
I use a lenove T61 laptop and my problem is that the PCMCIA card share
IRQ with some usb device on IRQ 16:
debian:~$ cat /proc/interrupts
CPU0 CPU1
16: 5328 20016 IO-APIC-fasteoi uhci_hcd:usb4, yenta,hdsp
I want to move my hdsp to another IRQ, but can't figure out howto, it is
a matter of firmware version on my Multiface card ? I can't move the
PCMCIA card since there is only one available slot....
You can't. Unless you have a ThinkPad. Or a desktop machine where you can move cards
to different slots.
-ken