[LAU] Focusrite Saffire LE

Hi All I'm having significant trouble getting a Saffire LE to work with my setup. I have a Dell XPS M1210, running Ubuntu Studio. Because the inbuilt firewire device is the infamous RICOH chipset, I am forced to use a firewire Expresscard/32, detailed below :~$ lspci -v 0e:00.0 FireWire (IEEE 1394): Texas Instruments XIO2200(A) IEEE-1394a-2000 Controller (PHY/Link) (rev 01) (prog-if 10 [OHCI]) Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at ecc04000 (32-bit, non-prefetchable) [size=2K] Memory at ecc00000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 I am able to configure and start jack, :~$ /usr/bin/jackd -v -R -P89 -dfreebob -dhw:0 -r48000 -p128 -n3 Which produces getting driver descriptor from /usr/lib/jack/jack_dummy.so getting driver descriptor from /usr/lib/jack/jack_oss.so getting driver descriptor from /usr/lib/jack/jack_freebob.so getting driver descriptor from /usr/lib/jack/jack_alsa.so jackd 0.109.2 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. server `default' registered registered builtin port type 32 bit float mono audio registered builtin port type 8 bit raw midi clock source = system clock via clock_gettime loading driver .. new client: freebob_pcm, id = 1 type 1 @ 0x806ff40 fd = -1 Freebob using Firewire port 0, node -1 new buffer size 1024 LibFreeBoB MSG: FreeBoB Streaming Device Init LibFreeBoB MSG: Using FreeBoB lib version libfreebob 1.0.7 LibFreeBoB MSG: Device information: LibFreeBoB MSG: Device options: LibFreeBoB MSG: Port : 0 LibFreeBoB MSG: Device Node Id : -1 LibFreeBoB MSG: Samplerate : 48000 LibFreeBoB MSG: Period Size : 1024 LibFreeBoB MSG: Nb Buffers : 3 LibFreeBoB MSG: Directions : 0 showDevice: not implemented FreeBoB MSG: Register MIDI IN port dev1c_Midi In FreeBoB MSG: Register MIDI OUT port dev1p_Midi Out FreeBoB MSG: Streaming thread running with Realtime scheduling, priority 14 FreeBoB MSG: Registering audio capture port C0_dev1c_Rec 1 FreeBoB MSG: Registering audio capture port C1_dev1c_Rec 2 FreeBoB MSG: Registering audio capture port C2_dev1c_Rec 3 FreeBoB MSG: Registering audio capture port C3_dev1c_Rec 4 FreeBoB MSG: Registering audio capture port C4_dev1c_Rec 5 FreeBoB MSG: Registering audio capture port C5_dev1c_Rec 6 registered port system:capture_1, offset = 4096 registered port system:capture_2, offset = 8192 registered port system:capture_3, offset = 12288 registered port system:capture_4, offset = 16384 registered port system:capture_5, offset = 20480 registered port system:capture_6, offset = 24576 FreeBoB MSG: Don't register capture port for dev1c_Midi In FreeBoB MSG: Registering playback audio port P0_dev1p_Play 1 FreeBoB MSG: Registering playback audio port P1_dev1p_Play 2 FreeBoB MSG: Registering playback audio port P2_dev1p_Play 3 FreeBoB MSG: Registering playback audio port P3_dev1p_Play 4 FreeBoB MSG: Registering playback audio port P4_dev1p_Play 5 FreeBoB MSG: Registering playback audio port P5_dev1p_Play 6 FreeBoB MSG: Registering playback audio port P6_dev1p_Play 7 FreeBoB MSG: Registering playback audio port P7_dev1p_Play 8 FreeBoB MSG: Don't register playback port dev1p_Midi Out registered port system:playback_1, offset = 0 registered port system:playback_2, offset = 0 registered port system:playback_3, offset = 0 registered port system:playback_4, offset = 0 registered port system:playback_5, offset = 0 registered port system:playback_6, offset = 0 registered port system:playback_7, offset = 0 registered port system:playback_8, offset = 0 ++ jack_rechain_graph(): client freebob_pcm: internal client, execution_order=0. -- jack_rechain_graph() FreeBoB MSG: MIDI threads running with Realtime scheduling, priority 13 FreeBoB MSG: MIDI queue thread started libiec61883 warning: Established connection on channel 0. You may need to manually set the channel on the receiving node. libiec61883 warning: Established connection on channel 1. You may need to manually set the channel on the transmitting node. 20268 waiting for signals Aborted Almost as soon as jack is 'waiting for signals' it aborts, and that's it. Can anyone help me? I'm going crazy! Chris