Re: [linux-audio-user] VIA EPIA-M9000 for audio?

"Lloyd R. Prentice" wrote: The reason I asked this question a few days ago is that this board looks to my novice eye like a very promising, and relatively inexpensive, platform for audio projects. It's small, low-powered, highly featured. Spec sheet says it's Linux compatible. I'd like to experiment, but have been burned before by hidden gotchas. The specs include "six-channel surround sound." What does this mean? How would one exploit it with Linux? They also include two USB 2.0 ports. Would this make it suitable as a controller for external audio components? Would this board work well as a the basis for a dedicated, perhaps portable, digital recorder? I've seen it priced at $150 with CPU. Here's a url that reviews the board: http://www.silentpcreview.com/modules.php?op=modload&name=Sections&… Here are some quotes: VIA's approach is to go small: the EPIA-M has enough power to handle DVD movies and sound well, and the platform is small and cool-running enough to be easily adapted to cases that will mix-'n-match with existing home entertainment equipment. The CPU generates little heat; the primary power for multimedia functions is embedded in the chipset, and relatively independent of processing power. It can be made to run quietly and would be inexpensive. As already mentioned, VIA's new CLE266 chipset is the key to the performance of the EPIA-M. The board has the same marvelously tiny layout as before (17 x 17 cm), but with USB2.0, IEEE 1394 Firewire, smooth DVD playback, better TV out, LAN, support for faster DDR266 memory (instead of PC133 SDRAM) and better quality 6 channel surround sound. It also has better graphics (than the Trident Blade on the PLE133 of the EPIA series boards) with a new integrated graphics engine called Castle Rock. Another change quietly introduced is the addition of a port for a floppy drive, which is missing from the EPIA boards. With the small form factor of Mini-ITX, there is no room on the back panel for the IEEE 1394 Firewire ports. So VIA includes headers on the board and a Combo Module with 2 USB 2.0 ports and 2 IEEE1394 ports. The combo module requires the use of a PCI riser card in most Mini-ITX cases. With the two USB ports already on the back panel, this makes 4, which is generous for such a tiny board. In fact, the list of I/O connections (as shown in the specifications below) makes it clear that this is one very modern board. Best wishes, Lloyd R. Prentice