2009/4/7 Grammostola Rosea
<rosea.grammostola(a)gmail.com>om>:
> Hi,
>
> I want to record electric guitar chord progression. I've an:
>
> - epiphone les paul
> - little amp, orange 30r
> - maudio dmp 3 preamp
> - shure 58a beta
> - mic stand
>
>
> What do you prefer, preamp of mic in front of amp?
>
> How do you manage the gain and eq?
> - guitar
> - amp
> - preamp
> - ardour
>
>
> How do you mix it?
> I've read that it is useful to use an low-pass filter, some compression
> and EQ.
> What are good plugins on GNU/Linux for this?
> What goes pre- and what postfader?
> porl sheean wrote:
>
>> definitely use the amp/mic, unless you are after a specific 'dry' tone
>> (i have done it in the past, but it is very obvious that the electric
>> guitar is plugged in directly). i guess it depends on what type of
>> music you are playing. anything bluesy or rocky will definitely need
>> the amp. you may get away with an amp sim, but i haven't found one i
>> have liked enough to use for real
>>
I like to have a bit Jazzy sound.
>> as for the other questions, again, it depends
on the sound you want.
>> as a basic guide, get the sound you want from the amp and guitar
>> first. without a good sound here it is pointless continuing. once you
>> have that, then the gain for the pre and ardour should both be set as
>> high as possible without clipping. leave a little bit of headroom, as
>> most people will play slightly louder when recording than when
>> checking levels.
>>
Sound load as possible, but I got three ways to manage loudness,
guitar,
amp, preamp...
I also got some crisping sounds in Ardour. You can also see it on the
visual waveform, it has some
vertical lines on top and bottom, like: ||| | || |||| | |
People say additional sounds are often an problem with guitar, but is
this normal?
>> eq is something you will get many different
opinions on. generally
>> (unless i'm going for something specific) i like to use eq as little
>> as possible, just taking out parts of the sound that are clashing with
>> the rest of the mix (like lowering the bass range to remove rumble
>> when you are mainly playing in a higher register etc) or boosting
>> *slightly* parts of the sound i want to emphasise (this is very easy
>> to overdo, so be careful - otherwise you will get an artificial
>> headache sounding song).
>>
>>
And maybe the room accoustics does matter? I have an 3-4-4m. clean
room
(no much curtains etc.).
\r