4 Jul
2005
4 Jul
'05
10:22 p.m.
I've done that already, it works if i unplug then replug the interface, but
it's still not powered up after a machine start.Nothing in dmesg either.All
the files are there but nothing happens.
On the usb port next to this one , i have a Iriver player connected and it
works perfect, but no way to fire up the 2x2.
Thanks anyway for the help.
Firmware has to be loaded into the Midisport 2x2 for
it to operate. In
Windows this is done by whatever software was installed for this device,
and in Linux hotplug calls fxload to do the same.
The whole story and firmware are available under
ezusbmidi_2002_11_17.noarch.rpm or whatever other format you need.
With Fedora Core 3 running on 2.6.11-1.27FC3smp the 2x2 fires right up
when plugged in or if already plugged, at bootup. Fxload is already
present in /sbin, two files (loader instructions and devices map) go in
/etc/hotplug/usb, and two firmware files go in /usr/share/usb/ezusbmidi
- it's just that simple.
Frank