[LAU] First netjack test using jackd2: ecasound transport doesn't move

These are my first netjack experiments, ever. I followed this reference: http://trac.jackaudio.org/wiki/WalkThrough/User/NetJack Here is what I did: #### sound server side (with local soundcard) $ jackd -d alsa hw:0,0 -r 44100 $ jack_netsource -H thinkpad Connected :-) netjack: at frame 000051 -> total netxruns 1 (1%) queue time= 93121 $ ecasound -i test.wav -o jack,system [ sound plays ] ^C #### client side $ jackd -d netone NetOne driver started AutoConfig Override !!! AutoConfig Override: Master JACK sample rate = 44100 AutoConfig Override: capture_channels_audio = 2 AutoConfig Override: capture_channels_midi = 1 AutoConfig Override: playback_channels_audio = 2 AutoConfig Override: playback_channels_midi = 1 MTU is set to 1400 bytes $ jack_lsp system:capture_1 system:capture_2 system:capture_3 system:playback_1 system:playback_2 system:playback_3 $ ecasound -i cdda.wav -f f32_le,2,44100 -o jack,<CLIENT>,<TRANSPORT> -c for TRANSPORT settings: send sendrec notransport for JACK CLIENT setting: "system" and "system:playback_1" The transport stays stuck at position 0.0, and the 'start' command does not start the engine, which remains in status 'stopped'. Grateful for ideas where I should go next, Thanks, -- Joel Roth