Re: [LAU] Jconvolver on Raspberry Pi

Hello, Doesn't my connections problems originate from my asound.conf For recall, here is my config files : asound.conf : /# convert alsa API to jack API # use it with: # % aplay foo.wav # pcm type jack pcm.rawjack { type jack *playback_ports { 0 jconvolver:in.L 1 jconvolver:in.R* } capture_ports { 0 system:Output_L 1 system:Output_R } } # jackplug pcm.jack { type plug slave { pcm "rawjack" } hint { description "JACK Audio Connection Kit" } } # use following peripherical by defaut with alsa: pcm.!default { type plug slave { pcm "rawjack" } }/ At east this explain why squeezelite doesn't connect if jconvolver isn't active So I tried to come back to the ealier version of asound.conf where squeezelite connect directly to jack. Than, I start Jack, I start Squeezelite /root@DietPi:~/folve/filter# jack_lsp -c system:playback_1 rawjack:out_000 system:playback_2 rawjack:out_001 rawjack:out_000 system:playback_1 rawjack:out_001 system:playback_2/ I can disconnect /root@DietPi:~/folve/filter# jack_disconnect system:playback_1 rawjack:out_000 root@DietPi:~/folve/filter# jack_disconnect system:playback_2 rawjack:out_001 root@DietPi:~/folve/filter# jack_lsp -c system:playback_1 system:playback_2 rawjack:out_000 rawjack:out_001/ start jconvolver /root@DietPi:~# jack_lsp -c system:playback_1 jconvolver:out.L jconvolver:out.R system:playback_2 rawjack:out_000 rawjack:out_001 jconvolver:in.L jconvolver:in.R jconvolver:out.L system:playback_1 jconvolver:out.R system:playback_1/ It didn't work, I should again disconnect and reconnect to make it work So I conclude that my latest setup was the good one Right ? Best Regards, Jean -- View this message in context: http://linux-audio.4202.n7.nabble.com/Jconvolver-on-Raspberry-Pi-tp98952p98… Sent from the linux-audio-user mailing list archive at Nabble.com.