19 Jul
2015
19 Jul
'15
3:40 p.m.
Hi
First gratulations on your new guitar.
Now to your questions, yes you can use the DI and the 1/4" cable (TS?), and
that would be the better approach,
as opposed to connecting the headphone amp.
I wouldn't use the headphone amp from the amplifier as the impedances will
most likely not match.
If you've got a preamp and microphone you could mic up the amp and record
that.
I'm have used rackarack, but mostly I use guitarix, but that's personal
preference.
Have fun!
Cheers
Moshe
On Sun, Jul 19, 2015 at 3:19 PM, jonetsu(a)teksavvy.com <jonetsu(a)teksavvy.com>
wrote:
Hello all,
Just got an electric guitar. First time. Now putting on a new set of
strings.
Got a 1/4" wire and a passive direct box that's already used for a
Wavedrum. Got also a small guitar amp with an headphone out jack, as
an option. The audio card is a M-Audio 1010LT.
Can I simply take the 1/4" wire from the passive direct box and connect
it to the guitar ? I believe there's a guitar processing app out there
called something like rackarrack or such. Does this work through jackd
as in doing the audio routing using qjackctl ?
Alternatively if I want the amp's sound and processing, I can simply
use the amp's headphone out, although I'd like to try the computer
based only interface and processing.
Cheers.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user