16 Feb
2015
16 Feb
'15
11:54 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On 16.02.2015 18:36, Harry van Haaren wrote:
You can also do OSC-over-MIDI via sysex messages ;-)
No, the MIDI "cable" baud rate is 31250,
while MIDI over USB runs
at 112500. Its faster - but there are still limitations.
Where do these 112500 Baud come from?
Just curious...
Does this refer to low-speed USB-MIDI (e.g. 1.5Mbit/s)?
e.g.
112500 Baud = 1.5Mbit/s / 8bit * 3/4 * 0.8
3/4: USB-MIDI prepends 1 byte to every raw MIDI 3-bytes [1]
0.8: -20% USB bus overhead
???
Regarding the above: -Sequentially handled: yes
Not necessarily.
USB is packet based and USB-MIDI uses bulk-transfers with a maximal
packet size of 64Bytes. A common 3-byte MIDI instruction packed in a
4-byte USB-MIDI instruction thus gives you 16=64/4 possible concurrent
events.
Whether those concurrent events will be treated as such by a host is
another matter...
high-speed USB has a maximal packet size for bulk transfers of 512
bytes, I'm not sure though whether this applies to USB-MIDI, too?
-Bandwidth: lots better than DIN-cable MIDI, but
limited
Depends on underlying USB speed, I guess
low-speed (1.5Mbit/s) vs full-speed (12Mbit/s) vs high-speed (480Mbit/s)
2. I had not heard of MIDI-over-OSC.
Yes - almost everything is possible with OSC - any
form of data can
be passed around as a "blob" of binary data, timestamps are
available to be used for timing, and "bundles" can be used to have
multiple events be processed at exactly the same time.
Sequential handling? Yes - unless in a bundle. Bandwidth:
unlimited.
Just like MIDI, OSC's maximal bandwidth is limited by its underlying
communication layer [2]. You may send OSC via UDP/TCP on Gigabit LAN.
But people do pack it into USB and Serial, too.
/bye0000,s00hp00
[1] http://www.usb.org/developers/docs/devclass_docs/midi10.pdf
[2] http://nime2008.casapaganini.org/documents/Proceedings/Papers/163.pdf