17 Aug
2006
17 Aug
'06
7:04 p.m.
On Thu, 2006-08-17 at 22:37 +0200, Mathias Friman wrote:
I can play sound for the Phones-output jack through
Audacity with
PortAudio v19 using both (hw:1,0) and (hw:1,1)
but i cannot do:
aplay -D hw:1,0 test.wav or
aplay -D hw:1,1 test.wav
because it outputs:
Plays WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz,
Mono
aplay: set_params:901: Channels count not available
Use plughw:x,x, not hw:x,x. Probably the device does not support mono
natively.
If this fails, post the output of "aplay -v -D plughw:1,0 test.wav" etc.
Lee