[linux-audio-user] M-Audio Fast Track Pro setup

Hi list! I have borrowed a M-Audio FastTrack Pro from work and I try to get it to work under Ubuntu Linux 6.06 (Dapper). Since I have a MidiSport at home, I have patched up my system with a firmware from http://usb-midi-fw.sourceforge.net/ and that seem to work on the M-audio FastTrack Pro aswell. The device is detected correctly as an USB-device, and all the appropriate modules are loaded; snd_usb_audio, snd_usb_lib, snd_seq_midi and so forth. /dev/snd/* looks like: controlC0 controlC1 midiC1D0 pcmC0D0c pcmC0D0p pcmC0D1c pcmC0D2c pcmC0D3c pcmC0D4p pcmC1D0p pcmC1D1c pcmC1D1p seq timer That is to say I have one control, one MIDI, two playbacks and one capture for my M-Audio FT Pro. I can play sound for the Phones-output jack through Audacity with PortAudio v19 using both (hw:1,0) and (hw:1,1) but i cannot do: aplay -D hw:1,0 test.wav or aplay -D hw:1,1 test.wav because it outputs: Plays WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:901: Channels count not available When I run 'alsamixer -c 1' it outputs: No mixer elems found and it also does not show anything in Jack (qjackctl). My /proc/asound/devices: <snip> 40: [1- 0]: raw midi 49: [1- 1]: digital audio playback 57: [1- 1]: digital audio capture 48: [1- 0]: digital audio playback 32: [1- 0]: ctl </snip> It seems to me there should be some more inputs/outputs to choose from. I found a recent discussion on some alsa development list that didn't look too promising: http://article.gmane.org/gmane.linux.alsa.devel/39666 I've also looked to alsa.opensource.org, to no avail. Anyone got any tips regarding this device? Regards, Mathias