25 Apr
2018
25 Apr
'18
12:32 p.m.
Jeremy Jongepier wrote
Does the interface work with another computer or OS? Which input are you
using? Instruments should go into input 2 and if it's a stringed
instrument with a pickup and no preamp the Hi-Z button should be
activated. What kind of instrument are you using it with? Could you test
with something else like a microphone?
Yes, the interface worked in the computer of the person I got it from. I am
connecting an electric bass guitar to the input2/R with Hi-Z pushed.
Sensitivity knobs are set to middle, volume to high. Neither the mono nor
the Mon SW buttons are pressed. The input know is set to a little over the
middle. As I said before, I know the interface gets sounds because if I turn
the sensitivity on a lot, I can see the peak light lighting up when playing
the instrument.
I tested with a mic but the same. NO sound is shown on the computer.
Jeremy Jongepier wrote
It sounds more like a setting on the interface itself.
The settings at the back are:
Sample Rate: 44.1
Advanced mode: off
Phantom: Off
Comp/Limit type: Bypass
Ground Lift: nor
and the usb input has the cable that connects it to the computer.
Any suggestion to figure why I can't record sound are very appreciated.
Thanks in advance.
--
Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html