16 Feb
2013
16 Feb
'13
1:37 a.m.
Le 15-02-2013 19:03, Len Ovens a écrit :
Do you have the analog levels turned up (the ice1712
driver seems to
default to lowest level in pulseaudio)? Also remember that your
ice1712
might be hw:1 and not hw:0 if you also have an internal audio IF. In
pavucontrol (assuming pulseaudio is the default audio server) you
need to
select you d1010 as the default output or turn the internal audio
right
off. So if pavucontrol shows audio going to the d1010, look at mudita
in
the aualog tab and turn up at least DAC 1 and DAC 2 (ADC1 and 2 for
recording).
OK. first of all, pavucontrol was not installed (which is a Good Thing
since I like lean Linux distros). So I installed it. In the attached
screen shot, the blue bar is the output of vlc playing an audio track.
I must say that I'm not familiar at all with pavucontrol, since I never
used it before, in all those years I used audio in fedora (both playing
audio files and recording with Ardour). I've tried a few things, but
all controls in mudita24 shows '(off)'.