20 Nov
2002
20 Nov
'02
2:15 p.m.
Emiliano Grilli wrote:
Patrick Shirkey <pshirkey(a)boosthardware.com> ha
scritto:
Is this with the imic?
It occurs to me that you should only be using capture with JACK.
ie. jackd -v -d alsa -d hw:0 -C
Otherwise if the device can support duplex operation you should contact
the alsa-devel list with details AFAIK all modern devices support 44100.
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================
Being on stage with the band in front of crowds shouting, "Get off! No!
We want normal music!", I think that was more like acting than anything
I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
try -d hw:0
Same result :'-(
However, if I don't specify sample rate I get:
________________________________________________
jackd 0.40.1
Copyright 2001-2002 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
loading driver ..
creating alsa driver ... hw:0|1024|2|48000|swmon
Sorry. The audio interface "hw:0"doesn't support either of the two
hardware
sample formats that jack can use. ALSA: cannot configure capture channel
cannot load driver module alsa
jack main caught signal 15
__________________________________________________
So I suspect that I have to see "creating alsa driver ...
hw:0|1024|2|44100|swmon" when I specify -r44100, but output stops at
"loading driver .."