28 Feb
2016
28 Feb
'16
6:13 p.m.
On Sun, Feb 28, 2016 at 4:58 PM, Peter P. <peterparker(a)fastmail.com> wrote:
> [251636.327240] pci 0000:05:00.0: [10ee:3fc5]
type 00 class 0x040100
> [251636.327280] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
> [251636.327491] pci 0000:05:00.0: supports D1 D2
> [251636.327496] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
> [251636.335144] pci 0000:05:00.0: BAR 0: assigned [mem
0xf0000000-0xf000ffff]
[251636.335176] pci 0000:05:00.0: no hotplug
settings from platform
> [251636.335274] cannot find the slot for index 1
(range 0-29), error:
-16
> [251636.335283] snd_hdsp: probe of 0000:05:00.0
failed with error -16
Seems related:
http://alsa-devel.alsa-project.narkive.com/9vepYUEw/rme-multiface-i-pccard-…
What is the output of cat /proc/asound/cards ?
> and the red LED on the Audio interface (which
indicates an error) stays
lit.
It indicates there is no host connected - almost the same but not quite,
because the device keeps running standalone if the host is disconnected.
-Harry
--
http://www.openavproductions.com