8 May
2010
8 May
'10
2:36 a.m.
--- On Fri, 5/7/10, Philipp <hollunder(a)lavabit.com> wrote:
From: Philipp <hollunder(a)lavabit.com>
Subject: Re: [LAU] Please help with audio interfaces that keep changing after reboot
To: "linux-audio-user" <linux-audio-user(a)lists.linuxaudio.org>
Date: Friday, May 7, 2010, 7:57 PM
Excerpts from Geoff King's message of
2010-05-08 01:17:39 +0200:
Instead of aplay -l, I would use the list of cards in the file /proc/asound/cards
The proper name to use is the one between squared brackets [ ]. The command 'aplay
-l' has the reversed bracket "semantic".
J.
Hello,
I have problem that I've been trying to figure out
with no luck. The
audio interface keeps changing for example:
Today: Maudio 24/96 is hw:1 and Midisport 4x4
Anniv is hw:0.
Yesterday before reboot: Maudio 24/96 is hw:0 and
Midisport 4x4 Anniv is hw:1
etc, back and forth, each reboot...
I usually use qjackctl and have to keep changing the
presets with
settings which is annoying.
I would greatly appreciate it if someone could provide
me some clues
or links on how to fix this?
I'm Using Fedora 12 w CCRMA.
thanks, Geoff
The easiest solution might be, using my setup as example:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: UA25 [UA-25], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 0: ALC268 Analog [ALC268
Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
So I use hw:UA25 in jack instead of hw:0
Jack always uses this device if it can find it, it always
just works.
If you have multiple other devices you need hardwired you
might need
some other trickery, but I guess in your case it's a simple
matter of
figuring out the right name for the maudio interface.
--