4 Nov
2014
4 Nov
'14
12:19 p.m.
apparently no! weird...
I tested beatstep in windows 7 , in FL studio,
assigned some pads and knobs to control some stuff in a pads plugin and a
synth plug in.
Then I changed the channel on beatstep and pressed the same pads / turned
the same knobs and the controls continued working as before...
if you have another test to suggest Jeremy, i'll run it.
thanks
On Tue, Nov 4, 2014 at 10:11 AM, Jeremy Jongepier <jeremy(a)autostatic.com>
wrote:
On 11/04/2014 02:57 AM, Athanasios Silis wrote:
hi all,
I recently bought an arturia beatstep that I'm planningto use for audio
routing control and music composition in linux.
I am currently monitoring "all midi stuff" that come out of this little
midi controller , using "qmidiroute" to see the event log.
I see that all commands that are sent from Arturia's beatstep are on midi
channel 1.
I tried changing that from beatstep surface, (holding down "CHAN" button
and selecting a channel from the 16 pads) but the event log still
registers
midi information on channel 1.
am I doing something the wrong way?
or does beatstep only step signal on midi channel 1 Only?
thank you in advance for you help!
Hello Athanasios,
Ah, someone with an Arturia Beatstep, interesting device, GAS ;) Setting
the channel should be reflected in QMidiRoute. Did you test it on a
different OS by any chance? Does it work there?
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user