Re: [LAU] Outputs on Focusrite Scarlett 18i6 not working

On Thu, July 9, 2015 10:27 pm, Ílson Bolzan wrote: The jack server just uses alsa, so if there is a problem it is because the jack configuration conflicted with an alsa setting for the device. Concentrate on getting the device working alone with alsa, then jack should just work with no problems. This message indicates that jack was requested to use 44100 sample rate. ALSA would not accept the setting requested. That is often due to clock conflicts, so check the clock settings of the audio interface. The most common problem is that the device is configured to lock to an external clock source, but the external clock is either not provided, or is provided at a rate different than requested (e.g. the external clock could be 48000 but the device is requested to run at 44100). The most common setting would be to use internal clock, and either let ALSA set the clock rate requested, or manually verify that the device is configured to use internal clock, 44100 rate (assuming that is actually the sample rate you want to use). -- Chris Caudle