Re: [LAU] ground loop hell

Beware old building with additions :P It appears we have power coming from two power entrances with two different earth grounds to the panels. I had found two power cords with the ground pin pulled which I replaced... big ground loop noise. I tried (as read from a number of sources) making unballanced cables with a small resitor in the ground path but this made things worse not better. I will be running a power cord from the stage back to the mixer next.

All of our signal in paths are already isolated. It is only the two monitor mixes to powered monitors that are unballanced and causing problems. The outputs from the mixer are ballanced, but the lines to the stage are not... I may make cables to allow me to use two of the input ballanced lines instead and two more isolation boxes as a longer term fix. There will be a new stage going in and I have already been asking that power and grounding be corrected for the whole signal flow. -- Len Ovens www.ovenwerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user(a)lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user