17 Oct
2002
17 Oct
'02
9:14 p.m.
hi
im using 0.9rc3 - should i upgrade to cvs?
all that qinit says is "Segmentation fault" - can check dmesg /
/var/log/messages etc. tho if you need...
thanks, yes its a useful script... ahh, i see, if it has no mixer elems
that would explain the message from alsamixer, i was worried i'd done
something wrong in the config. volume adjusts fine with alsaplayer but
xmms plays *very* loud... like i have it on about 1% and its already
booming... i do use an analog mixer at home but when im out n about with
the laptop i tend to just use cans (except for performance of course)...
thanx
m
Are you using cvs or 0.9rc3? Can you send the output
of qinit? BTW I
didn't write it. Takashi whipped it up for me while we were testing and
it has become part of my startup scripts so I thought it would be useful
for other users too.
Apart from that the quattro has no mixer elems. The only way you can
adjust the volume is using the output level buttons on the box or using
software mixing like in ardour, alsaplayer, xmms (equilisation). You
should be using an analog mixer with it if you want to record at
sufficient volumes.
--
iriXx
www.iriXx.org
copyleft: creativity, technology and freedom?
info(a)copyleftmedia.org.uk
www.copyleftmedia.org.uk
_
( ) ascii ribbon against html email
X
/ \ cat /dev/sda1 > /dev/dsp
*** stopping make sense ***