15 Dec
2004
15 Dec
'04
12:08 p.m.
On Tue, 2004-12-14 at 11:33, ish(a)sarai.net wrote:
> Hi every one ... i ve witten a kind of a rough How-to(Draft) for initial
> recording using Ardour... and using JAmin along with it via JACK(jackd).
> This was primarily go give a basic how to of intial acoustic recording.
> And how a mastering software, which in this case is JAmin can be used to
> tweak the recording to produce a well spaced/MAstered
> recording...(Basically to achive the stuff in youe head) . Well this is
> just a start... and any input from your side will be helpful... so please
> check out the following site ...
>
> http://users.sarai.net/~ish/contents.html
Nice, helpful writeup. I did notice a significant error you might
want to correct, however.
On this page...
http://users.sarai.net/~ish/Exporting_audio.html
Your example checks *both* Left and Right stereo channels when
exporting Audio 3:out-1 and Audio 3:out-2 to a WAV file. I believe
this gives "mono" output in a stereo file (in the sense that both
channels will be the same). I recommend checking Left for Audio
3:out-1 and Right for Audio 3:out-2. That will render the stereo
outputs from JAMin correctly.
--
joq