3 Oct
2007
3 Oct
'07
10:05 p.m.
On Thursday 04 October 2007, Nigel Henry wrote:
irq handler priorities:
4 root -51 0 0 0 0 S 0.0 0.0 0:00.00 softirq-high/0
5 root -51 0 0 0 0 S 0.0 0.0 0:00.03
softirq-timer/0 6 root -51 0 0 0 0 S 0.0 0.0 0:00.00
softirq-net-tx/ 7 root -51 0 0 0 0 S 0.0 0.0 0:00.00
softirq-net-rx/ 8 root -51 0 0 0 0 S 0.0 0.0 0:00.00
softirq-block/0 9 root -51 0 0 0 0 S 0.0 0.0 0:00.00
softirq-tasklet 10 root -51 0 0 0 0 S 0.0 0.0 0:00.03
softirq-sched/0 11 root -51 0 0 0 0 S 0.0 0.0 0:00.00
softirq-hrtimer 12 root -51 0 0 0 0 S 0.0 0.0 0:00.00
softirq-rcu/0 184 root -51 -5 0 0 0 S 0.0 0.0 0:00.00
IRQ-8 207 root -51 -5 0 0 0 S 0.0 0.0 1:23.59 IRQ-14 210
root -51 -5 0 0 0 S 0.0 0.0 0:00.34 IRQ-15 287 root
-51 -5 0 0 0 S 0.0 0.0 0:00.16 IRQ-12 288 root -51 -5
0 0 0 S 0.0 0.0 0:00.00 IRQ-1 605 root -51 -5 0 0
0 S 0.0 0.0 0:00.27 IRQ-11 813 root -51 -5 0 0 0 S 0.0
0.0 0:01.17 IRQ-9 815 root -51 -5 0 0 0 S 0.0 0.0
0:00.00 IRQ-6 847 root -51 -5 0 0 0 S 0.0 0.0 0:00.00
IRQ-7 883 root -51 -5 0 0 0 S 0.0 0.0 0:00.00 IRQ-10
Ok, you have not done any irq priority tuning.. Try setting the IRQ-10 process
[your emu10k1] to prio 90..
jackd priorities:
Please run jackd at a prio higher than 51 [for example 70].
Flo
--
Palimm Palimm!
http://tapas.affenbande.org