However, the output of sudo lsusb -v is way too long, so I cannot get it
 from the terminal, I will save it to a file and paste with the next message.
 On Mon, May 12, 2014 at 12:24 PM, Jeremy Jongepier <jeremy(a)autostatic.com>wrote;wrote:
  On 05/12/2014 10:02 AM, Louigi Verona wrote:
  Harry,
 "And hyperthreading (usually a bios setting)?"
 Will try to turn it off.
 
 Hi Louigi,
 With the JACK settings you're using this probably won't make a
 difference. If you go really low latency-wise you might run into issues.
 "Personal experience with an Acer tm 5720, even setting to powersave
 governed makes xruns / fallouts go away."
 are you suggesting that at powersave mode things are actually better? 
 Why?
  I just tried doing this, xruns continue to be
generated.
 
 Disabling scaling, so setting a governor that doesn't change the CPU
 freq, should yield better results, no matter which governor this is.
 Lorenzo,
 "Did this include turning CPU Scaling off and setting _all cores_ to
 "performance"?"
 Yep.
 "Also switching off (internal) wifi improves the situation here."
 How do you switch it off? 
 There should be a radio button on your keyboard linked to a Fn key to
 disable WiFi. Otherwise you could try unloading the kernel modules
 loaded by the WiFi interface or even unbinding them. But I don't think
 this is your issue either. Could you pastebin the output of some commands?
 cat /proc/interrupts
 sudo lspci -v
 sudo lsusb -v
 cat /etc/default/rtirq
 uname -a
 Thanks!
 Jeremy
 _______________________________________________
 Linux-audio-user mailing list
 Linux-audio-user(a)lists.linuxaudio.org
 
http://lists.linuxaudio.org/listinfo/linux-audio-user