5 May
2012
5 May
'12
11:37 p.m.
I've been doing this for 10 years. I've successfully run the M-audio delta
1010LT, the delta 1010, the Echo Audiofire12, and now the Raydat. The only
card which has ever exhibited this behavior is the Raydat, so there is a
high likelihood it is the Raydat's issue. The drivers which were written
for this card are brand-new as of alsa 1.0.25, if I remember correctly.
Perhaps I should notify the author (Adrian Knoth) of the driver...
As for now, I'm making due with Jack2, recording the "export" on to a
stereo track, and then exporting the track itself. Seems to work, albeit a
bit more slowly...
Thanks again for the attention.. Hopefully we figure this out, because the
Raydat is an amazing card, and works very well with Linux OOTB.
--Jason
On Sat, May 5, 2012 at 2:59 PM, Stéphane Letz <letz(a)grame.fr> wrote:
Could it be that the RME Raydat interface does not
"restart" correctly
when the freewheel (export) mode is finished?
Can you possibly test with another audio card? Or even with the "dummy"
driver?
Stéphane
Le 5 mai 2012 à 22:08, Jason Jones a écrit :
Can you possibly get a larger error log?
Actually, there is no error to be found anywhere, but in the jack
messages, and
those are the only ones. Neither jack nor mixbus stop
working when this error manifests itself. It just sits with the export
dialog window open forever.
It seems like mixbus is simply waiting for some sort of response from
jack.
Perhaps there's a way to get more verbose logs?
Thanks for your response, and patience, Stephane.
--Jason