1 Nov
2004
1 Nov
'04
10:11 a.m.
This is the output from rosegardensequencer on the first run
rosegarden (sequencer): SequencerMmapper : setting size
of /tmp/kde-davmul//rosegarden_sequencer_timing_block to 91012
rosegarden (sequencer): SequencerMmapper : mmap size : 91012 at 0xb64fd000
rosegarden (sequencer): SequencerMmapper::init()
rosegarden (sequencer): Registering with DCOP server
Rosegarden 0.9.9 - AlsaDriver - alsa-lib version 1.0.4
AudioFileReader::run()
AudioFileReader::run() done
JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 2048
JackDriver::initialiseAudio - creating disk thread
JackDriver::initialiseAudio - found 10 JACK physical outputs
JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to
"alsa_pcm:playback_1"
JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to
"alsa_pcm:playback_2"
JackDriver::initialiseAudio - found 12 JACK physical inputs
JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to
"rosegarden:record in 1 L"
JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to
"rosegarden:record in 1 R"
JackDriver::initialiseAudio - initialised JACK audio subsystem
ALSA Client information:
64,0 - (M Audio Delta 1010LT MIDI - Rawmidi 0, M Audio Delta 1010LT MIDI)
(DUPLEX) [ctype 2, ptype 2, cap 127]
129,0 - (ardour, seq) (WRITE ONLY) [ctype 1, ptype 2, cap
99]
Creating device 0 in Play mode for connection 64:0 M Audio Delta 1010LT MIDI
(duplex)
Default device name for this device is MIDI external device
Creating device 1 in Record mode for connection 64:0 M Audio Delta 1010LT MIDI
(duplex)
Default device name for this device is MIDI hardware input device
Creating device 2 in Play mode for connection 129:0 ardour: seq (write)
Default device name for this device is MIDI software device
AlsaDriver::setCurrentTimer((auto))
Current timer set to "PCM playback 0-0-0"
AlsaDriver::initialiseMidi - initialised MIDI subsystem
rosegarden (sequencer): RosegardenSequencer - started OK
AlsaDriver::reportFailure(0)
rosegarden (sequence manager): ControlBlockMmapper : Couldn't
open /tmp/kde-davmul//rosegarden_control_block
WARNING: Rosegarden::Exception: "Couldn't
open /tmp/kde-davmul//rosegarden_control_block"
and the output from ardour
finished route resort
Audio 1 master
finished route resort
Audio 1 master
finished route resort
Audio 1 master
finished route resort
Audio 1 master
finished route resort
Audio 1 master
Segmentation fault
Not sure why it cant open the tmp file permissions seem ok and all was working
well maybe something to do with kde3.3?
Dave
On Monday 01 November 2004 12:06, Chris Cannam wrote:
On Monday 01 Nov 2004 10:52, David Mulcahy wrote:
Just recently updated debian unstable and I am
not sure if it was
just coincidence, but if an ardour session is loaded and I start
rosegarden, somewhere in the middle of initialising a session ardour
gets killed. In fact it is impossible for the two apps to coexist
rosegarden always kills ardour
Spooky. Never seen that one before, and I can't offhand think of a
reason for it.
Might as well start by looking at the stdout/stderr output from each:
run ardour from one terminal window and then "rosegardensequencer" (the
non-GUI part of Rosegarden) from another, and see what happens. If
ardour gets killed, see what it and rosegardensequencer printed out
last before that happened. Otherwise leave them both running and also
run "rosegarden --existingsequencer" from a third terminal, and see
what happens then.
Chris